Uni-Hydro 125 Ton Ironworker PRO 125
Uni-Hydro Pro 125
Age: 2019
Stock Number: 1257
Accessories Available:
-Punch nut wrench for L series or 150 and 500 series punch nut
-Punch Rack holds up to 30 sets of L series punches
-Punch table with adjustable jig for high production with accuracy
-Bar shear stop for production shearing up to 24" lengths
-Deluxe Back Gauge for production shearing up to 24-inch lengths
-Steel Bin for collecting steel dropping from bar shear
-Oversize die stand for punching over 2 1/4" round *
-Oversize stripper for punching over 2 1/4" round
-Offset die stand for punching close to the web on angle iron
Click to view larger photo
Specification | Description |
Throat Depth | 12" |
Tonnage | 125 |
Punch Capacity | 1-9/16" Hole in 1" Material |
| 2" Hole in ¾" Material |
| 3" Hole in ½" Material |
Angle Shear | Slug Type 6" x 6" x 1/2" |
Shipping Weight | 4,850 Lbs. |
Equipped With:
Manual punch aligner
125-ton open throat punch
24" Bar Shear with 4 sided blades ($1,500.00 Option)
Magnetic starter for safety and reliability
Fixed or adjustable bar shear hold-down
Electric foot control
Eyelet and forklift accommodations
Variable stroke control
4th station allow notching without retooling
Grease bank for lubricating machine without removing covers.
Wired 220v/3Ph
Advantage Products Inc.
21090 Horseshoe Trail
Corcoran, MN 55340
(763) 439-9347
sales@advantagecnc.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com